Importing Frozen Produce into France: A Buyer Guide for China-Origin IQF Broccoli

Reviewed 16 October 2026. In France, the practical sequence is the food operator and SIRET record, an existing or new EORI, DELTA IE through the importer or customs representative, and any product-specific food-control result before cold-store release. This worked example is conventional broccoli florets, washed, blanched and individually quick frozen in China, in industrial bulk packing, with cooking required before eating. It is not a seasoned, organic, ready-to-eat or infant-food product. A changed formulation, claim, origin, route or entry date requires a new check. We can help assemble the supplier-side evidence, while the EU importer and its appointed representatives make the official applications and release decisions.

The EU frozen produce import guide covers the law common to all member states. This guide concentrates on the French registrations, portals, border handoffs and first-lot decisions that a generic EU checklist cannot settle.

Define the exact frozen broccoli SKU and import decision

Write one product identity and use it everywhere. The commercial description should say broccoli florets, Brassica oleracea var. italica, China grown and processed, one ingredient, blanched, IQF, for cooking, with the actual net mass per liner and carton. The invoice, packing list, production record, carton mark and import declaration should agree on that identity. "Frozen vegetables" is a useful category for a website, but too broad for a tariff or a residue decision. It could describe mixtures, seasoned preparations, vegetables steamed before freezing or raw frozen ingredients with different commercial uses. If a broker receives only a broad category, it has to reconstruct facts while a refrigerated container is already moving.

The customs starting point is heading 0710 for vegetables, uncooked or cooked by steaming or boiling in water, frozen. A conventional blanched broccoli floret normally belongs in the frozen other-vegetables branch, rather than heading 0704 for fresh or chilled Brassica. The importer and broker must confirm the full current CN/TARIC code, the treatment and any national declaration detail. That check controls duty, restrictions and the document codes in the customs entry. It also determines whether a targeted measure names the product. One cannot infer the final tariff treatment from the word broccoli alone, and this guide does not promise a duty rate based on a generic eight-digit code.

For a French import, ask the broker to write "broccoli florets, blanched, frozen, China" into its classification note rather than adopt a fresh 0704 code from a produce catalogue. The customs declaration should name the French business and the destination warehouse that will actually receive the cartons. If the container first enters the EU through another member state, identify whether France is the place of customs release or the destination after transit or prior free circulation. The French DELTA IE route applies to a French import declaration, not to a container already cleared elsewhere in the Union.

Actual GreenLand frozen broccoli product form for grade discussion.

Before a purchase order becomes a production instruction, define the buyer's use. A soup factory may want small crowns that disperse; a ready-meal line may prefer larger intact florets; a foodservice packer may have a visual grade and a particular carton weight. All three can import the same legal commodity but reject one another's commercial grade. We would record target crown width, stem allowance, broken-piece share, colour, foreign material, pack mass, lot size and cook test in the agreed specification. These are buyer-contract criteria unless a specific legal rule says otherwise. We should agree the test method and acceptance sample size rather than advertise a "premium grade" without a measurement.

The importer-of-record decision is equally specific. Name the EU entity in charge of placing the food on the market, the customs declarant and its representation authority, the warehouse receiving the cartons, and the customer who may approve or reject them. A freight forwarder can make a filing for an importer; a customs MRN still does not replace that importer's food-safety duties. Keep the EORI holder, commercial buyer, consignee and cold-store operator visible as separate roles when they differ. Their identifiers must match the fields in the relevant systems and the shipping documents.

Register the local food business and name the applicant

EU Regulation 852/2004 Article 6 makes the food business notify the appropriate authority of each establishment under its control so it can be registered. The legal obligation applies to activities such as importing, handling, storing and distributing this plant-origin food. It does not turn a Chinese broccoli supplier into a French registered importer; the local entity must complete its own establishment procedure. Nor should an animal-product establishment approval form be applied automatically to a single-ingredient frozen plant food. We ask the buyer for the registration identity and activity scope, not a decorative certificate from an unrelated scheme.

The French buyer first needs its registered business identity and the establishment identifier for its actual food activity. Regulation 852/2004 requires notification of food establishments to the competent authority. For a plant-only import and cold-storage operation, contact the departmental DDPP/DDETSPP covering that establishment, describe importing, storage and wholesale activities, and ask which local notification channel applies. The animal-food CERFA 13984 is not automatically the form for plain broccoli. For example, the current official Seine-Maritime directory lists DDPP food-safety contact ddpp-ssa@seine-maritime.gouv.fr and +33 2 76 78 36 00. That is a worked contact for an establishment in that department, not a national filing address. Provide the legal entity, establishment address, activity description, cold-store arrangements and product/process sheet; keep the authority's response and resulting registration evidence. We provide the broccoli composition, processing and intended-use sheet for that discussion.

The local business should then set internal authority for three tasks. The quality manager owns the food specification, supplier approval and receiving hold. The customs lead or broker owns the tariff line, EORI, declaration and fiscal data. The logistics lead owns the entry point, arrival notice if one is applicable, reefer booking and cold-store slot. A single person can cover several jobs, but the shipment file should name who gives the answer to each authority. We would ask for a named technical contact before final artwork and documents are locked, because a last-minute change to importer name or delivery location ripples through invoice, label, declaration and release instructions.

How the decisions in this section connect for the specified broccoli lot.

Every EU customs trader generally needs one EORI identifier, issued by the member state of establishment or first relevant operation, usable across the Union. A company already holding a valid EU EORI should verify it, not ask for five national EORI numbers merely because it buys in several countries. Local VAT arrangements and company registration are related but different records. If an overseas seller proposes to act as importer, the buyer should have the customs representative and tax adviser test who may be declarant and what fiscal arrangement is needed; an Incoterm alone does not create an eligible EU food operator.

For customs identification, use French Customs' official EORI application service. Check for an existing valid EORI first; an operator established elsewhere in the EU normally uses its home-state EORI. A French applicant uses the linked SOPRANO-Accès simplifié → EORI route, supplies its legal identity and requested registration details, and retains the issued identifier. For a business without French VAT identification or with another member state's VAT number, Customs specifies a commercial-register extract and proof that France is the first customs-operation state where applicable. The service is free; Customs says a number becomes active 24 hours after issue, which is not a promise to decide every application within 24 hours. Validate the number before the broker files. The EORI SIREN is the legal-entity identifier used in EU customs applications. French Customs' 7 September 2026 transition notice still allowed SIREN or SIRET in the goods-location field pending the announced change. Have the broker check current system instructions rather than assume every SIRET identifier has already ceased to work.

Classify the goods and check the current conditional border list

Separate three questions that are often conflated. First, is this commodity subject to the EU's temporarily increased official controls or an emergency measure? Second, does its physical state fall under a plant-health certificate or CHED-PP rule? Third, does France impose a national arrival or sanitary step for non-harmonised food even when the first two answers are no? The broker should record the answer and the version of the measure used. A search result about fresh broccoli or a different country of origin cannot resolve a China-origin, blanched, frozen 0710 floret.

The current consolidated Implementing Regulation (EU) 2019/1793 lists specific food or feed, origins, CN lines and hazards in its annexes. The consolidated version shown on EUR-Lex is dated 30 June 2026 as of this review. We did not find ordinary China-origin frozen broccoli florets in the relevant listing on that review date. The resulting working route is ordinary non-animal food rather than an automatic CHED-D and TRACES pre-notification. This is a product-and-date conclusion, not a standing exemption for all Chinese frozen vegetables. Confirm the annex again before shipment, including any later amendment, TARIC measure, route-specific direction or emergency restriction. If a future entry captures the exact product and origin, the importer must use the designated border route, notice, documents and official decision then in force.

The EU plant-health regime commonly discussed for fresh vegetables must also be matched to the product state. This is a processed, blanched and fully frozen floret under the proposed 0710 heading, not a fresh head under 0704. We would not request a fresh-produce phytosanitary certificate or a CHED-PP simply because the botanical species is broccoli. The importer should confirm the actual presentation against the current plant-health annexes and the authority at the first EU entry point. Wood packaging, if used, has its own treatment/marking issue; it does not change the food classification. An authority may still sample an ordinary import under risk-based controls, so "not listed for systematic CHED-D" never means "outside food law."

The current EU listing decision changes the French BCP route; DELTA IE and DGCCRF oversight remain distinct.

French food controls are not automatically a dedicated border dossier for every frozen vegetable. The DGCCRF import-control explanation describes the intensified-control route for listed non-animal foods and the TRACES notice. Its 2020 context must be read alongside the current 2019/1793 annexes. If the actual SKU becomes listed, the importer and broker must identify the designated French BCP/control point and competent authority before choosing a landing port. For ordinary broccoli, keep a dated negative-list check and prepare for possible risk-based document or physical control rather than inventing a compulsory CHED-D.

The practical evidence is a dated classification note: commodity description, photos or specification of frozen form, proposed CN/TARIC code, country of origin, intended use, search of the current targeted annexes, and the national authority or broker confirmation. Share that note with the supplier before loading. If a control is triggered, do not send a reefer to a terminal that cannot provide the required inspection facility. Book a cold-compatible inspection slot, decide who pays storage and sampling costs, and place any official certificate reference in the customs declaration only after it actually exists. If no targeted control is triggered, retain the note so a routine customs question can be answered quickly.

Prepare the national customs and food-control applications

An import declaration is a data set, not a scanned folder of certificates. The declarant needs importer and representative identifiers, the full commodity code, origin, customs procedure, value and currency, quantities, transport details, invoice reference and any required document or prohibition code. The freight forwarder separately handles manifest and arrival operations; a terminal release or delivery order is a physical logistics decision. When a food-control document is required, its result or reference must be aligned with the customs entry. Filing a declaration does not itself mean customs has released the goods for free circulation.

French Customs lists DELTA IE as the current import and export e-service, with an account on the customs portal and DTI or EDI route. Its import declaration guidance says the declarant may lodge directly or use a customs representative; DELTA IE import has operated since 26 March 2025. For this industrial sea freight, the broker should prepare the standard import data and confirm the correct DELTA IE procedure. DELTA H7, a low-value consignment dataset, is not the natural path for an industrial broccoli container. If the importer uses a French customs warehouse or transit before free circulation, the chosen procedure and movement records must be explicit.

Before sailing, we would give the buyer a draft commercial invoice and packing list for broker review. Each should show GreenLand's supplier identity as contracted, buyer and consignee, exact product, origin, packing configuration, net and gross mass, lot codes, container/seal references when known, value and currency. The bill of lading, freight terms and origin evidence then need reconciliation against those drafts. The EU buyer's customs broker should advise whether a preferential tariff claim is available under the actual rules of origin and documentary proof. A generic certificate of origin or China-origin statement is not an automatic preference. For the first shipment, ask the broker to return a data-field checklist rather than a vague "documents okay."

How the decisions in this section connect for the specified broccoli lot.

French Customs states that a declaration may be lodged at presentation or up to 30 days before presentation under the relevant advance-declaration conditions. That is a filing window, not a promise that customs will release an IQF container within 30 days or by the next morning. Ask the broker when the manifest, arrival and entry data will be available, and whether a cold-store unloading appointment should be held pending a customs message. We would send the final weight and lot list early enough to avoid replacing data after vessel arrival.

On arrival, the declarant monitors the customs message or MRN, responds to requests for documents, pays or accounts for duty and VAT as applicable, and records the free-circulation result. If a food authority has ordered a hold or sampling, customs and carrier movements must respect it. The cold-store should be told whether cartons may be unloaded, held under customs control, placed under an official food hold, or used for production. Those are different statuses. A spreadsheet with one green "cleared" cell hides the difference and makes a later trace exercise harder.

Agree EU safety, labels and a buyer specification for this lot

Food safety has a legal layer and an order layer. EU General Food Law, Regulation 178/2002, places responsibility for safe food, traceability, withdrawal and recall on food businesses. Regulation 852/2004 sets hygiene obligations. Regulation 396/2005 controls pesticide residues through substance-and-commodity maximum residue levels, including the exact residue definition and processed-food treatment. Regulation 2023/915 controls named contaminants, and Regulation 2073/2005 sets microbiological criteria only for its specified food categories and stages. We would not copy an unrelated ready-to-eat food criterion or a fresh-produce default into a cook-before-eating blanched IQF broccoli release sheet.

As a concrete EU contaminant example, Regulation 2023/915 has a 0.10 mg/kg lead maximum for the ordinary Brassica-vegetable row 3.1.5.1 and a 0.040 mg/kg cadmium maximum for the ordinary Brassica row 3.2.5.1, on wet weight, after washing and separating the edible part. Broccoli belongs to that Brassica group, but this is a blanched and frozen processed food. Article 3 requires the relevant processing factor to be justified where no specific processed-food maximum is listed; it would be careless to label 0.10 and 0.040 mg/kg as automatically validated final-IQF thresholds without assessing that factor. The buyer's laboratory plan should state analyte, edible portion, wet-weight basis, sample size, method, limit of quantification and processing-factor rationale. A reported result with no method or lot identity is not a release decision.

For residues, use the current EU pesticides database and Annexes to Regulation 396/2005 for each active substance and the broccoli commodity definition. The well-known 0.01 mg/kg default is used only where the regulation supplies no specific MRL and no other applicable provision; it is not a universal limit for all pesticides. The laboratory needs a method that captures the legal residue definition, which may include metabolites, and a suitable reporting limit. For microbiology, agree a buyer risk plan for this cooked-use food, including Salmonella and Listeria where the customer's hazard analysis calls for them, but distinguish the contract from a statutory row. The buyer must decide whether its actual downstream process changes the intended-use classification.

EU Brassica lead and cadmium examples are linked to the French DELTA IE lot file, subject to the processed-food factor.

For French professional distribution, the importer should decide whether cartons remain B2B ingredient packs or are repacked for a French consumer-facing sale. We would agree French product name, ingredient statement where required, storage and "cook before eating" instruction, country-of-origin statement when applicable, batch code and French operator particulars before print. Claims such as organic, pesticide-free or ready-to-eat need separate proof and should not appear by default. The buyer's DDPP/DDETSPP contact can clarify local language expectations for the actual presentation; the common EU labeling rule is the starting point, not a substitute for an approved French artwork proof.

The pack text should identify the food, lot, net quantity, operator details, origin where required or where omission misleads, storage instructions and the necessary use or cooking instruction. Regulation 1169/2011 distinguishes prepacked consumer information from information transmitted for food supplied to mass caterers or for further processing. Industrial cartons can use commercial documents for some particulars under the regulation's conditions; they cannot disappear from the trace system. The importer decides the French language solution for its actual sales channel. An English-only exporter carton may be acceptable in a limited professional transaction only if the competent rules and recipient understanding permit it; it should not be assumed adequate for later consumer-facing sales. We would provide editable artwork fields and have the local operator approve the final text before print.

Handover GreenLand production, testing and shipping evidence

For your order, we prepare a product and lot file that the importer can use for supplier approval, local filings and receiving checks. We begin with the agreed floret specification, source identity, harvest and intake-lot links. The production record should follow washing, blanching, cooling, IQF, grading, foreign-material control, packing and frozen storage. We match the processing description to the actual line and product: the blanch setting needs a defined purpose and validation, with monitoring records for the production run. We can provide the agreed process-flow and verification information, together with the link from source lots to packed batches, so your technical team can review how the ordered ingredient was controlled.

For a French order, we send your importer one product-and-lot description that can support its local food-business contact, broker instructions and supplier approval. It identifies the Chinese manufacturing site, broccoli ingredient and blanch/IQF state, cooking use, pack version and carton-to-pallet codes. Your French operator adds its own EORI and establishment identity. We then reconcile the invoice, packing list, laboratory sample and transport instructions before loading. That cross-check helps a DDPP or customs query reach the correct site and batch without treating the Chinese processor's address as the French importer's premises.

After IQF, two different sorting concepts should be stated correctly. Colour or optical sorting detects visible colour and shape deviations under its configured conditions. Density-based X-ray inspection can find some dense foreign bodies depending on calibration, product geometry and pack presentation. Neither can be promised to remove every physical hazard, and one should not describe an optical colour sorter as if it measures internal density. A sensible acceptance file records the controls actually used, verification result and nonconformance handling. The supplier's role is to show evidence for the lot, while the buyer determines whether it meets the agreed specification and legal criteria.

The finished-lot file should tie a batch code to a defined sampling plan. For each requested laboratory panel, ask which jurisdictional rule or buyer criterion the result is meant to satisfy; state unit, analyte or organism, sample unit, method, laboratory identity and date. A "pass" logo on a COA without the analytical basis is weak evidence. We would also reconcile the quantity represented by the sample with the carton count shipped. If several production batches share one container, each batch needs its own trace link and agreed composite or separate sampling logic. The importer should retain source, purchase and sale records in a form that supports one-step-back/one-step-forward traceability.

A French SIRET record, any BCP result, DELTA IE line and buyer receipt meet at the finished IQF lot.

The French dossier should pair the broker's DELTA IE goods description with our lot specification, invoice and carton text. If the authority asks for a product description, we can provide treatment and ingredient statements; if it asks for results, we can supply the tests actually performed on the named lot. We would not claim that GreenLand has obtained a French sanitary import approval. The importer should keep the field-to-container trace chain with its French distribution records so a withdrawal can identify both the affected cartons and customers.

Before loading, freeze the final data set: invoice, packing list, product specification, label proof, lot and carton list, available COA, container and seal, loading record and temperature logger arrangement if agreed. The shipping document should not call it "fresh broccoli," "organic broccoli" or "ready to eat" unless those facts and claims are genuinely true and documented. We can propose a cold-chain logger, but the parties must agree who installs it, who reads it and what excursion leads to hold or investigation. A reefer setpoint alone does not prove product core temperature throughout voyage or acceptance on arrival.

Separate border, customs, carrier and buyer release

At destination, the first check is administrative: did the correct authority receive any required notice, and is the official result recorded? The second is customs: has the declaration been accepted and the goods released for the chosen procedure, with duty and tax handled? The third is carrier and terminal: is the delivery order available, has the container been discharged and can a refrigerated truck collect it? The fourth is commercial: does the buyer accept the food lot for its intended operation? These events may occur hours or days apart. No party should treat a gate passed by another party as proof that its own gate is satisfied.

On a French arrival the broker records the DELTA IE MRN and final customs status; a selected official food control has its own decision. The carrier or terminal then issues the physical delivery order, and the French cold store checks the reefer and cartons under a buyer hold. If the container arrived elsewhere in the EU, keep the transit or first-member-state release record and distinguish it from delivery into France. The buyer's quality release should cite its own sample and temperature evidence, not only the French customs message.

The receiving team should record seal integrity, carton count, outer condition, lot codes, temperature evidence and any visible thaw/refreeze signs. It can sample floret size, broken share, stem proportion, colour and cooked performance against the agreed method. If results conflict with the COA or the expected condition, segregate the affected lot, keep it frozen, preserve the temperature and photo record, and notify the supplier and importer before use. A customs release does not require a food factory to use a nonconforming ingredient; conversely, a good product inspection cannot legalise an uncleared customs entry.

Actual GreenLand broccoli floret detail for receiving inspection.

The first-lot review should be operationally useful. Record actual filing numbers, broker corrections, inspection appointments, cost items, transit and waiting times, temperature readings and any buyer deviations. Put those observations beside the planned process for the next order. We can then revise the pack or document template where it caused a real delay. We should not promise a uniform port dwell time or claim a registration fee without an authority's current tariff and a defined service. What we can promise to prepare is a matched SKU and lot evidence package so the local importer can make its own applications and a defensible receiving decision.

Related reading